1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 9 9.1-Mackie Control Pro "Arrange Mode" and Logic Mixer View weirdness

Discussion in 'Logic 9' started by mDay, Jan 23, 2010.

  1. mDay

    mDay Member

    Not sure if it's a new setting to Logic 9 I'm not used to or it's strange behavior, but I always work with my MCU set to "Arrange Mode" (Global View green LED blinking) and now when I open the Mixer in Logic it automatically switches my MCU to "Mixer Mode" (LED not lit up).

    In Logic 8 the Mixer in Logic was completely independent of the MCU setting, which was nice because you could have custom views of your Mixer in Logic but have the Arrange mapped out on your MCU. Am I missing a new setting or is this just new strange behavior in Logic 9? Thanks!!
     
  2.  
  3. Jay Asher

    Jay Asher Senior member

    In the Mixer's View menu, do you have Link Control Surfaces checked?
     
  4. mDay

    mDay Member

    whoops! yup that was it. thank you. i knew it had to be something simple. :) cheers Jay!
     
  5. Jay Asher

    Jay Asher Senior member

    You are welcome. This is why I get the big bucks as a Logic consultant:)
     
  6. mDay

    mDay Member

    haha nice...well then if you don't mind looking at my most recent thread maybe you can shed some light on it. :) thanks!
     

Share This Page