1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

adat on effect processor

Discussion in 'Metric Halo' started by teddyg, Sep 29, 2010.

  1. teddyg

    teddyg New Member

    Hi,
    I'm a new user of the uln2.
    I have an H8000FW effect processor plugged in adat to my uln2 2d. I use logic 9.
    But when i use the IO plugin in logic i did'nt see the adat inputs/outputs. I tried to launch the MIO with the basic preset but nothing go to the adat.
    Please, is someone can say me the procedure ?
     
  2.  
  3. Allen Rowand

    Allen Rowand Member

    You need to assign DAW channels to output to the ADAT outputs, and assign the ADAT inputs to FW channels to return back into Logic.

    To modify the Basic template to do what you want:
    1) Open the Basic template and delete the Digital L/R and ADAT channelstrips
    2) Go to the Mixer menu and select "Create Multiple Mixer Strips…"
    3) Add 1 7.1 channel input strip
    4) Set the input source to be DAW 3-10, and the pre-insert direct out to ADAT 1-8
    5) Mute the strip and assign it to the Main bus
    6) Go to the Mixer menu and select "Create Multiple Mixer Strips…"
    7) Add 1 7.1 channel input strip
    8) Set the input source to be ADAT 1-8, and the pre-insert direct out to FW 3-10
    9) Mute the strip and assign it to the Main bus

    Now if you send to output 3-10 and return on input 3-10 in Logic, your audio will send and return on ADAT 1-8.

    Allen
     

Share This Page