Combo Remapper - use score text and symbols to switch articulations
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 9 Banjo Tablature !!!Help!!!

Discussion in 'Logic 9' started by conradjs, Sep 16, 2009.

  1. conradjs

    conradjs New Member

    I've configured a tablature setting In Logic Pro 9 for 5-string Banjo and it causes some bizarre behavior when I try to score a song. While working in the score editor, the tablature that is generated from the music notation I specify is way off the mark. In fact, all tablature generated appears on one line, no matter what note I place in the score. After playing around with the banjo tablature configuration I created, I can tell that Logic seems to be getting confused by the high G(top) string of the banjo. I realize the string arrangement on a 5-string banjo is unique, but I would think Logic should be able to handle this configuration. Am I missing something??

    Thanks in advance for any help with this very frustrating problem.

    -Scott
     
  2.  
  3. Doug Zangar

    Doug Zangar Senior member

    Scott,

    I've done a lot of guitar tab over the years in Logic and the secret is to assign a separate MIDI channel for each string. That's how the program knows how to assign what pitch to what string. I do this automatically by playing in my parts on a MIDI guitar controller that is assigned to give each string a unique MIDI channel.

    I admit this is not as smooth if you have to do this by hand. Hope this helps. If you want to post here or e-mail me your Logic file, I'll take a look at it.
     

Share This Page