Combo Remapper - use score text and symbols to switch articulations
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 8 Double Tracking Vocals

Discussion in 'Logic 8' started by mtjkeys, May 4, 2009.

  1. mtjkeys

    mtjkeys Member

    What is the easiest way to double track, mult (multi) vocals? Am I missing something in the channel strips that can replicate a doubling as well?
     
  2.  
  3. Orren Merton

    Orren Merton Logic Samurai / Administrator Staff Member

    To be honest (I say this as a vocalist) the best results you're going to get are by actually tracking multiple times. You can use things like Waves Doubler plug-in, a stereo delay, duplicating tracks and shifting them in time, etc. But nothing will have the visceral impact of simply recording the vocal numerous times.

    If you recorded multiple times into the same Takes folder, you can always pull out one or another Take to use as a double, or make multiple Quick Swipe Comps and pull each out as their own track, etc.

    I'd highly recommend doing that instead of using plug-ins to fake a multi-record/double.

    Orren
     
  4. mtjkeys

    mtjkeys Member

    Thanks Orren! I guess old school is still the best way. Although technology is great, sometimes there's really no better substitute. Tim
     
  5. paulnajar

    paulnajar Senior member

    The only true way to do it so it sounds doubled (nice or good) is to get the vocalist to sing it twice to different tracks. Don't waste your time with anything less. It all just sounds like a bad chorus
     
  6. mtjkeys

    mtjkeys Member

    Exactly. Tim
     
  7. daveyboy

    daveyboy Senior member

    If the chorus's are similar (assuming you're doubling a chorus), I'll take the 2nd chorus and use that as the double on the first, and take the first chorus and use that as the dble on the 2nd. This has more to do with people not being able to sing a dble (a lot can't ). It helps to maybe turn the original way down, or off, and have them sing it again.
     
  8. artofmixing

    artofmixing New Member

    Here's an alternative to double tracking which is used to fatten up vocals: use a combination of panned delays and reverb to thicken your vocals. This can be achieved in logic pro with the use of buses - the multi-meter analyser is also used to check the width of your vocals. I have posted a video of this technique at:

    http://www.musicproducerxxx.com/play.php?vid=234

    Alternatively the old fashioned ADT can be achieved by copying the original vocal audio file onto a separate audio track and applying a short delay (no more than several milliseconds) to it.

    Hope this helps.
     
  9. mtjkeys

    mtjkeys Member

    The tutorial is great!
     

Share This Page