Sample Aid
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 8 exporting single track as mono

Discussion in 'Logic 8' started by toddsta, Jun 23, 2009.

  1. toddsta

    toddsta New Member

    Can I export a track (not song) that has bad l/r balance in stereo out as a mono track that I can then re-insert into the project/song and adjust/mess with?
  3. leytonnz

    leytonnz Senior member

    yes.. change the stereo symbol on the track ( at the bottom of the meter) to either left ( meaning it will only use the left side, or right, or mono..)


    leave it as stereo and change the output 1-2 to a mono channel ( ie 1) and press the bnce button on the channel strip

    NB: do not use the hot key for bounce with a mono output channel as this will in fact render a stereo file - i found that out the hard way 30 files later :-(

    alternatively do a stereo bnce as a split file and then youll have a separate .l and .r to play with.. use "disconnect selected split audio file" from the audio bin to separate them

    when you get the mono file into the session use :
    a stereo sample delay
    the stereo spreader
    a stereo chorus ,flanger etc
    or even the direction mixer to play with the image

    or drag in two copies ( one for left, one for right) and process one differently from the other

Share This Page