1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 7 & earlier Input delay/latency

Discussion in 'Logic 7 and older Versions' started by siu99adw, Oct 25, 2009.

  1. siu99adw

    siu99adw Guest

    Hello,

    I am running Logic Audio 5.5.1 on Windows Vista (yes it works!). I have a Yamaha Clavinova connected via a M-Audio Midiman 2x2.

    When I play notes on the Clavinova, there is a delay (latency) before the sounds are received in Logic. I have used other software with the same Clavinoa/Midiman setup with no delay, so this must be a logic issue.

    Help would be appreaciated, feel I'm banging my head against a brick wall at present! :brkwl:

    Andy
     
  2.  
  3. alienimplant

    alienimplant Senior member

    It's your buffer setting in the audio driver. Make it as small a number as you can. Most people are comfortable with a setting of 256 or less. If set too short, the signal will malfunction because the interface may not be able to handle very short buffer settings.
     

Share This Page