Combo Remapper - use score text and symbols to switch articulations
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 9 Logic Pro Audio I/O Level + - db

Discussion in 'Logic 9' started by EAR, Oct 16, 2011.

  1. EAR

    EAR New Member

    Is there a place in Logic Help or in other, where Logic gives the correct + - db level output that has been pre programed in Logic?

    many thanks
    EAR
     
  2.  
  3. CSeye

    CSeye Senior member

    Logic uses Peak meters.
    A -20dBFS pink noise file will show up as -17 dBFS (peak) on the output meter.

    You can insert a Level meter and select Peak&RMS in the pop-up, or insert a Multimeter which will give you -20dBFS on the RMS scale.
     
  4. EAR

    EAR New Member

    Thank you for your reply.
    Let me rephrase my question.
    When Logic audio level output reads + - 0db, is it a true 0 db or more?
     
  5. CSeye

    CSeye Senior member

    OdB on the Logic peak meter is OdBFS.
    The RMS value (light blue) is -3dB below peak when using a test file.

    Metering musical content will indicate a wider, variable gap between peak and RMS.

    Hope this helps.
     

    Attached Files:

  6. EAR

    EAR New Member

    Dear CSeye,

    Thank you. Your reply answer is very helpful.

    Best regards,
    EAR
     
  7. CSeye

    CSeye Senior member

    EAR,

    You're most welcome.

    Best regards,
    wv
     

Share This Page