1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

New Euphonix Transport Control

Discussion in 'Euphonix' started by Eddie Sullivan, Mar 31, 2009.

  1. Eddie Sullivan

    Eddie Sullivan Senior member

  3. Orren Merton

    Orren Merton Logic Samurai / Administrator Staff Member

    I saw that too! I'm very excited, and definitely looking forward to adding one to my MC Artist rig! :)

  4. Eddie Sullivan

    Eddie Sullivan Senior member

    How is your MC Artist behaving? I find that the system is really well-designed and stable but occassionally (and I mean like once) I noticed a 'buzzy' fader, or a fader that kind of 'fights' you- not sure what I was doing wrong... seemed to be OK after that...
  5. Orren Merton

    Orren Merton Logic Samurai / Administrator Staff Member

    I've not noticed any fader issues at all. The MC Mix is really a dream, a fantastic controller! The MC Control's touchscreen can sometimes be slow to respond, which can be a bummer. Hopefully that will continually improve with new software updates.

    The main issue I have is that every so often, they won't get detected. Turning on and off the controllers, relaunching EuControl, none of that seems to work. I'll end up restarting, and it will all be fine.

  6. christig

    christig New Member

    I have experienced that too but have concluded that their was either automation or expression programed to that fader.
  7. christig

    christig New Member

    I have this problem too. You can reattach the workstation without having to restart. Go to the Euphonix preferences - (click on the green icon in the menu bar). Select the workstation menu. Highlight the work station and add it to the menu on the right. Then click attach.

    Once in awhile I will need to restart the Euphoinx software and turn off then on the controllers if I can't get the work station to show up in this menu. Also I have found that the workststion shows up more frequently if Logic is open.
  8. replicant

    replicant New Member

    Apparently there's a new firmware and software update in the works that will improve the speed of the touchscreen of the MC Control.

    Mentioned in this video from 3:43
    [YOUTUBE]<object width="480" height="295"><param name="movie" value="http://www.youtube.com/v/f_mqcSUoslE&hl=sv&fs=1"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/f_mqcSUoslE&hl=sv&fs=1" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="295"></embed></object>[/YOUTUBE]
  9. Markdvc

    Markdvc Administrator Staff Member


    Yes, I spent quite some time chatting with JC on the Euphonix stand at the Musik Messe, and I did notice that the demo system (the same one shown in the video you linked) responded noticeably faster to commands compared with my own. The screen wasn't flickering either. I must say, he was open and interested in getting feedback and chatting about the artist system, we discussed just about all the points I wrote about here:


    Kind regards

  10. Atlas

    Atlas Senior member

    Faders are sometime fightings especially when their assigned track is not selected

Share This Page