1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 9 Punch in & cycle- quick question

Discussion in 'Logic 9' started by M_C_M, Jul 1, 2010.

  1. M_C_M

    M_C_M New Member

    Hi Everyone,

    In L9, when I set a punch in point it also activates the cycle mode. Is there a way to stop this from happening?

    I hope I explained that well enough, I've search for an answer but not found anything.
  3. Eli

    Eli Senior member

    Yes, you can enable the two functions independently. How are you enabling it now?

    Try using the autodrop button in the transport bar. You may need to control click t customize the transport in order for it to be visible.Or you can enable a key command for it. Seach for autodrop in the key commands.

    Or you could try option dragging in the bar ruler to set the autodrop zone independently of the cycle.

    Or you could try using the maruee tool if you want to keep it really simple. Just click and drag a marquee selection in the track you want to punch in on, hit record, and the area will be set as the punch in - or autodrop, to use the correct lingo, zone.
  4. M_C_M

    M_C_M New Member

    Thanks for the help Eli,

    I was thinking It might be the way I'm setting things up. At the moment I click the button on the transport bar ( I assume its autodrop, with the up and down arrows ) then set the locators on the bar ruler. when I go to record I find the cycle has also been set and things don't happen the way I want.

    While were on the subject. Is it possible to set just a punch in point? For example recording drops in and continues until you hit stop.
  5. Eli

    Eli Senior member


    Sorry - I was using "old" terminology. It's not called auto drop anymore; it's called auto punch. I agree the implementation for setting the in and out points is a bit clumsy. If you option click in the wrong area of the bar ruler, it's easy to unintentionally create a marker.

    Yes, that icon with the up/down arrows is the auto punch button. But there are a different set of locators that you need to set for using auto punch, separate from the regular locators used for cycle mode.

    When you customize the transport bar, you need to enable the display setting for "sample rate or punch locators". It will display the sample rate until the auto punch function is made active; at which point the display switches to displaying the auto punch locators.

    So, once you engage auto punch mode, you can adjust the in/out points from there. And all of this will be independent of cycle mode.

    There are also various key commands and optional transport buttons for setting punch in/out points by play head or rounded play head.

    All ot this is a bit cumbersome. You can just use the marquee swipe method and be done with it - and not have to worry about any of this. Just make a marquee selection in the track you want to punch in on, and that will automatically set your in/out punch locators and get you ready for auto punch mode when you hit record.

    As far as setting a punch in point with no punch out point, your best bet is to use the punch on the fly option.

  6. M_C_M

    M_C_M New Member

    Thanks again Eli, very informative...

Share This Page