1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 8 Stuck Midi Notes on Extenal Midi Help!

Discussion in 'Logic 8' started by santo, Apr 16, 2009.

  1. santo

    santo New Member

    New user. I searched stuck Midi external and did not come up with any threads. I am new to logic.

    I have Midi instruments on 2 PCs that I am controlling from a Mac with Logic. I frequently get stuck notes. I cannot find a way to work through it.

    Any help will be appreciated.
    Santo
     
  2.  
  3. Eli

    Eli Senior member

    In the lower right of the transport bar, double click on the "note out" field.It will send a "full panic" reset for all midi channels on all ports.
     
  4. santo

    santo New Member

    Yea, I understand. But that is not the problem. I have a 15 minute orchestral project that I am bouncing stems for further recording. Throughout, some instrument will sick and ruin the bounce.

    I have a PC running GigaStudio and a PC running VSTi instruments. I also use instruments internally in Logic. Just the external (both PC's stick). The PCs have RME cards for audio out and MIDI in.

    I just though maybe there is an adjustment of some kind in Logic that will filter the midi data to try and stop the sticking notes. At this point, I cannot finish the project until I solve the problem.

    But thanks for the advice.
    Santo
     
  5. Pete Thomas

    Pete Thomas Administrator Staff Member

    Isn't the problem with the PCs/gigastudio rather than Logic? MIDI is going out from Logic and only Audio is coming back in, so Logic can't do anything about what is coming in.

    As long as note offs are going out (you can check this in the transport or with a monitor object in the environment, then I think your problem is elsewhere.
     
  6. santo

    santo New Member

    Thanks for getting back and I will work through your suggestions.

    One thing. When I look at the PC monitors in both GigaStudio and (I have a simple VST host on the other pc called cantibile), they show the Midi activity and occasionally one of instruments sticks in either PC. Given that is happening on both PC's I though it was the MIDI stream coming out of Logic.

    It may be the MIDI interface between logic and the PC's. I am using a Digi003 for Midi out and I monitor on a Apogee Rosetta. Perhaps it is the MIDI in the Digi003. I usually use a MOTU Time Piece but it is not working. So maybe I should get a different Midi Interface.

    Thanks for the suggestions. This is a helpful community.
    Santo
     
  7. Pete Thomas

    Pete Thomas Administrator Staff Member

    I haven't used external MIDI for years, but when I did, all problems with stuck notes were due to me changing patches in the external modules on the fly. Logic is pretty solid in that respect in my experience.
     

Share This Page