1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

toggle all tracks between READ + TOUCH

Discussion in 'Euphonix' started by Judith Gruber-Stitzer, Feb 12, 2010.

  1. Judith Gruber-Stitzer

    Judith Gruber-Stitzer Senior member

    Hi All,

    I'm just beginning to use the MC Mix and Transport. I have 2 issues:

    First, Does anyone know if it's possible to program a Logic keyboard shortcut to toggle all tracks to go between read and touch?. I think there might be a way to program something like this with the MC Transport but I'm not sure.

    Second, I'd like to 'decouple' the MC Mix sometimes so that the faders stop moving while I'm working in Logic. Of course I'd need the automation to remain active.

    So far the only solution that's been suggested to me is that I power off and on the MC Mix.

    Any Logic / MC Mix + Transport maestros have any suggestions?

    Judith Gruber-Stitzer
  3. bobdemaa

    bobdemaa Senior member

    I don't have a transport, but I have a Mix and Control. (I've also discovered a neat trick to turn them into MIDI controllers... )

    Regarding turning all tracks at once into touch. The only way I know of to do this is with the Logic Mixer. Select all the track and change on of them to read or touch and they will all change. For sure there isn't a way with the mix.

    I know what you mean about wanting to decouple the faders. I've seen guys do that with Pro Tools by going into Trim mode. There isn't a way to do this and keep the surface alive. The only other suggestion I have is you could create a layout that had the faders set to <blank> but that wouldn't be much different to turning the device off, just that it would be quicker to jump in and out of the layout in the eu control app.
  4. Markdvc

    Markdvc Administrator Staff Member

    Have you tried pressing the shift and flip chan buttons? This swaps the fader and pan functions, so it isn't quite the same as pressing control + flip on a logic/mackie control, but unless you have a lot of panning in your mixes, it should quieten fader movement down. BTW, as it is a Euphonix specific subject, I moved the thread to the Euphonix forum

    kind regards

  5. bobdemaa

    bobdemaa Senior member

    Ahhhhh. very clever. sometimes its the simplest things.
  6. Judith Gruber-Stitzer

    Judith Gruber-Stitzer Senior member

    Hi Mark,
    Ooo... I think that will work just fine. You are clever:)
  7. Eli

    Eli Senior member

    Hi Judith,

    With regards to toggling the automation modes of all channels at once, I seem to recall that you can do it on the Mackie Control by holding down the option key when switching between the modes. Maybe this will work on the MC Mix????
  8. Xill

    Xill New Member

    It's a pre-programmed Eucon command available for the transport or the control. Just search through the list...

Share This Page