Combo Remapper - use score text and symbols to switch articulations
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 8 Track protection continues after disabling

Discussion in 'Logic 8' started by mmp, Apr 26, 2011.

  1. mmp

    mmp New Member

    Hello everyone - as mentioned in thread title, my track protection function continues even after I've disabled it through the Global Track Configure window. Anyone know how to get around this?
    Thanks -
  3. doofus

    doofus Member

    I think when this happened to me I had to trash preferences. Remember to save your key commands first, if you have any custom ones.
  4. pv_joker

    pv_joker Member

    I've also suffered this problem and I think it helped if I add the track protection button to the track header then put protection on and straight back off again. Might work for you, might not. Either way it's worth a go.
  5. Eli

    Eli Senior member

    The track protection function on the Global Track isn't the same as the Track Protect switch in the track header. In fact, it's probably closer to the "no transpose" function in the channel strip inspector. What specific "track protection functions" are you referring to?
  6. Doug Zangar

    Doug Zangar Senior member

Share This Page