Sample Aid
  1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 9 Ultra drum beginning bar question?

Discussion in 'Logic 9' started by uncle808us, Jan 5, 2013.

  1. uncle808us

    uncle808us Member

    Why is ultra drum not returning to the beginning bar when playing along with tracks in the arrange window? when I hit return the ultra drum does not reset to the beginning bar?
     

    Attached Files:

  2.  
  3. Tangra

    Tangra Senior member

    It depends on the bar or division you return to.
    For example:
    The default UB step sequencer length is a 32 steps which is equivalent of 32 sixteen note divisions regarding the Logic arrange grid (i.e 2 bars in 4/4). Meaning that:
    1. When you run Logic from 1.1.1.1 the UB starts from step 1.
    2. When you run Logic from 1.3.1.1 the UB starts from step 9.
    3. When you run Logic from 2.1.1.1 the UB starts from step 17.
    4. When you run Logic from 2.3.1.1 the UB starts from step 25.

    When you run Logic from 3.1.1.1 the UB follows the same step order laws shown above.

    Rejoice,
    A.G
     
  4. uncle808us

    uncle808us Member

    For some reason I can't get my head around what you are saying.I'm starting at bar 28 1 1 1 UB still jumps to step17. Man I wish I could figure this out. Sorry for my ignorance.
     
  5. Doug Zangar

    Doug Zangar Senior member

    Not sure if this applies, but UltraBeat responds differently depending if its on or not. If it's on, Logic transport toggles it on and off, but does not return to the beginning of the pattern. If you drag your pattern onto the arrange area and the UB track and turn UB off, It's good to line up with logic.....
     
  6. Tangra

    Tangra Senior member

    Yes that's correct if you use the default 32 steps length.
    If you follow carefully my first post you will note that UB will jump to step 17 when Logic playhead is placed on "even" bar numbers like 2,4,6,8 etc - bar 28 is an "even" one!
    If you place the playhead on "odd" bar numbers 1,3,5,7 etc the UB will start from step 1 (in 32 step mode).
    As you see this law depends on the steps 'length" amount set in the UB.
    Try/calculate some other length which is OK for your project. For example 16 steps will restart the UB sequencer to step 1 when you place the Logic playhead on any bar start 1,2,3,4 (incl 28)...

    Rejoice,
    A.G
     
  7. uncle808us

    uncle808us Member

    I get it now. Thank you. What do you think is the logic behind this? If I want to create the track in UB in the order of the bars 1-16 =28 1 1 1 then 2nd 17-32 = 28 2 1 1 it won't work that way. Or am I still missing something?
     
  8. Tangra

    Tangra Senior member

    If you want to create such special combinations then you can try the Doug Zangar's post above:
    Rejoice,
    A.G
     
  9. uncle808us

    uncle808us Member

    I cleared everything out of UB dragged the pattern to Logic but if I turn UB off how am I going to write the pattern? If I turn it on (UB) then it is still starting on the 17th step. So am I still missing something? Or will it just not start at step1 unless I am on an odd numbered measure?
     
  10. Tangra

    Tangra Senior member

    After daging the pattern onto arrange you just copy it (as a midi region) along the track, cut (shorten) it, line up the new slices etc - like you do with your regular midi regions. The UB sequencer must be OFF in this scenario so the UB will behave as a sound device only (like you use EXS24 etc).

    Rejoice,
    A.G
     
  11. uncle808us

    uncle808us Member

    OK I got it. I just recorded the track with my controller. No worries.
    It would be nice though if UB would start always on the first step.
    Thanks for staying with me on this.
    PS: I went to the fun listing on your webpage the song by you and your son was great.
     
  12. Tangra

    Tangra Senior member

    Glad to hear that you have solved the problem.
    Heh, I dedicated that song "The Passion of the Son" to my father. So the Son - that's me.:)
    Regards,
    A.G
     

Share This Page