1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Logic 9 When I solo no audio comes out

Discussion in 'Logic 9' started by ektor880, Apr 9, 2011.

  1. ektor880

    ektor880 New Member

    Ive got a little problem, when i click on solo button for any of the tracks, it will solo but I am not able to hear anything, but if I un-solo i can hear everything including the track im trying to solo. What should I do? Maybe I need some type of diferrent output channel? as you can see it is all sent to Stereo Out, im guessing it all goes directly to the master channel. Im new at Logic Pro this is my first week and im doing my best at learning the most, I just cant figure out what is happening here. Thanks a lot :D
     

    Attached Files:

  2.  
  3. leytonnz

    leytonnz Senior member

    thats the "mute" button. solo is the "s" , it will turn yellow
     
  4. ektor880

    ektor880 New Member

    Funny! I said I was new to Logic, but not that new to recording. And yes I get why you answered that. Track 1 which is muted, is selected. But no, im not talking about mute on track 1. Its the Solo button on all tracks. Thanks leytonnz

    Any other suggestions?
     
  5. leytonnz

    leytonnz Senior member

    ;-) ....does it only happen in this project? others? a fresh project?
    what your stereo output doing? ( not the master track, the actually stereo output channel)

    PM me the session( without audio files)
    L
     
  6. ektor880

    ektor880 New Member

    Just this session, other sessions and new sessions i can solo with no poblem. Actually i cant find the stereo output channel, maybe thats what im missing. I would really appreciate your help, let me get home and ill send it. Thanks a lot!
     
  7. ektor880

    ektor880 New Member

    Im trying to send you the session but cant figure out how, I think you cannot send files on private messages, ill just post a zip file here
     

    Attached Files:

    • AG.zip
      File size:
      229.2 KB
      Views:
      1
  8. leytonnz

    leytonnz Senior member

    my hunch was correct. You need a stereo master output.. once you have one of those it's good to solo.

    do you know how to make one?
     
  9. ektor880

    ektor880 New Member

    No i dont, i tried on finding in the manual but got no answer. Would you explain?
     
  10. leytonnz

    leytonnz Senior member

    create output

    goto the environment cmd+8 and choose new>channel strip>output.

    now to mixer.. ctrl click and "create/select arrange track"

    L
     
  11. ektor880

    ektor880 New Member

    Got it! Now I can edit with no problem. Nice! Thanks leytonnz
     

Share This Page